| | Channels | 1598 |
| GPS | L1, L1C, L2C, L2P, L5 |
| GLONASS | L1C/A,L1P,L2C/A,L2P,L3* |
| BDS | BDS-2: B1I, B2I, B3I
BDS-3: B1I, B3I, B1C, B2a, B2b* |
| GALILEOS | E1, E5A, E5B, E6C, AltBOC* |
| SBAS | L1* |
| IRNSS | L5* |
| QZSS | L1, L2C, L5* |
| MSS L-Band | BDS-PPP |
| Positioning output rate | 1Hz~20Hz |
| Initialization time | < 10s |
| Initialization reliability | > 99.99% |
| | Code differential GNSS positioning | Horizontal: 0.25 m + 1 ppm RMS
Vertical: 0.50 m + 1 ppm RMS |
| GNSS static | Horizontal: 2.5 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS |
| Real-time kinematic (Baseline<30km) | Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS |
| SBAS positioning | Typically < 5m 3DRMS |
| RTK initialization time | 2 ~ 8s |
| IMU tilt compensation | Additional horizontal pole tip uncertainty typically less than 10mm + 0.7 mm/° tilt down to 30° |
| IMU tilt angle | 0° ~ 60° |
| | Dimension | 130mm(W) ×130mm(L) × 80mm(H) |
| Weight | 790g (battery included) |
| Material | Magnesium aluminum alloy shell |
| Operating temperature | -45℃ ~ +75℃ |
| Storage temperature | -55℃ ~ +85℃ |
| Humidity | 100% Non-condensing |
| Waterproof/Dustproof | IP68 standard, protected from long time immersion to depth of 1m IP68 standard, fully protected against blowing dust |
| Shock/Vibration | Withstand 2 meters pole drop onto the cement ground naturally |
| Power supply | 6-28V DC, overvoltage protection |
| Battery | Inbuilt 7.4V 6800mAh rechargeable, Li-ion battery |
| Battery life | 15h (Rover Bluetooth mode) |
| Communications | I/O Port | 5-PIN LEMO external power port + RS232 Type-C (charge, OTG to USB disk, data transfer with PC or phone, Ethernet) 1 UHF antenna TNC interface |
| Internal UHF | Receive 2W |
| Frequency range | 410 - 470MHz |
| Communication protocol | Farlink, Trimtalk450s, SOUTH, HUACE, Hi-target, Satel |
| NFC Communication | Realizing close range (shorter than 10cm) automatic pair between receiver and controller (controller requires NFC wireless communication module else) |
| Bluetooth | Bluetooth 3.0/4.1 standard, Bluetooth 2.1 + EDR |
| WIFI | Modem | 802.11 b/g standard |
| WIFI hotspot | AP mode, Receiver broadcasts its hotspot form web UI accessing with any mobile terminals |
| WIFI datalink | Client mode, Receiver can transmit and receive correction data stream via WiFi datalink |
| Data Storage/Transmission | Storage | 4GB SSD Automatic cycle storage (The earliest data files will be removed automatically while the memory is not enough) Support external USB storage |
| Data transmission | Plug and play mode of USB data transmission
Supports FTP/HTTP data download |
| Data format | Static data format: STH, Rinex2.01, Rinex3.02 and etc.
Differential format: RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2
GPS output data format: NMEA 0183, PJK plane coordinate, SOUTH Binary code
Network model support: VRS, FKP, MAC, fully support NTRIP protocol |
| Sensors | Electronic bubble | Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time |
| IMU | Built-in IMU module, calibration-free and immue to magnetic interference |
| Thermometer | Built-in thermometer sensor, adopting intelligent temperature control technology, monitoring and adjusting the receiver temperature |
| User Interaction | Operating system | Linux |
| Buttons | One button |
| Indicators | 2 LED indicators |
| Web interaction | With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status and change the configurations freely |
| Voice guidance | It provides status and operation voice guidance, and supports Chinese/English/Korean/Spanish/Portuguese/Russian/Turkish |
| Secondary development | Provides secondary development kit, and opens the OpenSIC observation data format and interaction interface definition |
| Cloud service | The powerful cloud platform provides online services like remote manage, firmware update, online register and etc. |
